Description
If no preowned woodworking machinery is currently being listed in the category you are searching, call Stan the Woodworking Machinery Man at 770-861-0570 to check availability of incoming inventory, as our used machinery frequently sells before being listed.
Contact: Stan, the Woodworking Machinery Man
Phone: 678-642-9722
Email: stan@WoodworkingMachineryMan.com
SOLD Used Cehisa Edgebander – Model – Pro 7
List Price: $10 900.00
Year: 2004
Condition: CLEANED/CHECKED
Machine Stock Number: 11623
Member Stock Number: EB090012313
Serial Number: 117
Description: Used Cehisa Edgebander – Model – Pro 7
- 1.5 mm max. edgebanding thickness
- 5" min. panel length
- 3" min. panel width
- 3/8" min. panel thickness
- 2" max. panel thickness
- 1 HP feed motor with speed of 33 FPM
- (1) motorized pressure roller with (1) additional pressure roller
- 1/3 HP double blade end trim unit with a tooling speed of 12 000 RPM
- 1/3 HP top and bottom trim station equipped with digital readouts and carbide bevel tooling
- Automatic roll cutter and strip feed magazine
- Quick changeover for rolls or strip material
- Standard guillotine for cutting up to 1.2 mm PVC from the coil
- Quick melt glue pot with quick change disconnect for ease of maintenance or glue color change if required
- 10 to 15 min. heat up time depending upon voltage
- Digital thermostat with approaching temperature control (PDI) and auto temperature drop
- Machine weight: 1 244 lbs
- Electrical: Requires 19 amp service at 220V 3-Phase
- Machine floor space: 3' x 8'4" x 4' tall
- 1.5 mm max. edgebanding thickness
- 5" min. panel length
- 3" min. panel width
- 3/8" min. panel thickness
- 2" max. panel thickness
- 1 HP feed motor with speed of 33 FPM
- (1) motorized pressure roller with (1) additional pressure roller
- 1/3 HP double blade end trim unit with a tooling speed of 12 000 RPM
- 1/3 HP top and bottom trim station equipped with digital readouts and carbide bevel tooling
- Automatic roll cutter and strip feed magazine
- Quick changeover for rolls or strip material
- Standard guillotine for cutting up to 1.2 mm PVC from the coil
- Quick melt glue pot with quick change disconnect for ease of maintenance or glue color change if required
- 10 to 15 min. heat up time depending upon voltage
- Digital thermostat with approaching temperature control (PDI) and auto temperature drop
- Machine weight: 1 244 lbs
- Electrical: Requires 19 amp service at 220V 3-Phase
- Machine floor space: 3' x 8'4" x 4' tall