678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

Used SCM Shaper with HSK Spindle - Model: T160

Availability: In stock

$18,750.00

Quick Overview

Used SCM Shaper with HSK Spindle - Model: T160

This used spindle shaper with HSK spindle, manufactured by SCM, features 48” X 29.5” table dimensions.

Technical Specifications:

  • 7 + Axis integrated touch screen PC control over: spindle speed , height & angle, fence infeed & out- feed, sectioned table, feeder support vert. & horiz.
  • Program storage for up to 999 programs
  • Liquid cooled 13.5 hp electrospindle with maximum power available starting at 3000 rpm
  • Inverter control of electrospindle with range from 900 to 10,000 rpm and electronic brake
  • Pneumatic HSK B tool change system with air blower system for clean contact surfaces, and safety sensors for tool change operation monitoring: spindle rotation, tool taper lock go / no-go sensor 5 HSK B 63 spindles 1 1/4 Inch diameter with tooling cart
  • Spindle vertical movement on two precision linear guides, and tilt movement on precision arch-formed dovetail trunion through recirculating ball screw drives
  • Flex profiling fence system with 205mm stroke referenced to the center of the spindle shaft, with movement on two linear guides by recirculating ball screw
  • Fence includes the ability to stroke behind spindle
  • Spindle tilt angle from +45° to - 45° with maximum possible tool projection through angle range
  • Upper mobile control panel
  • Cope attachment with 500 mm stroke including miter gauge and clamp
  • Fast: sectional table to adjust for tool diameter
  • Powered cross support mount for feeder with readout
  • Aluminum fences
  • Magnetic starter with overload protection
  • Low tension circuit (110v by transformer)
  • Motor Horsepower: 13.5 HP
  • Table Dimensions: 2500 x 750mm (48” X 29.5”). Table Height: 920mm ( 36" )
  • Working Height of Spindle (under the nut): 140mm ( 5.5” )
  • Spindle Tilting: 0 to 45
  • 0 to -45 degrees Max. Tool Diameter w/ Profile Fence
  • 250mm (10”) Max. Tool Dia.
  • Retractable Under Table: 320mm x 75mm ( 12” x 2.9” )
  • Spindle Speeds (rpm): 900 to 10,000
  • Dust Outlet on Fence and Rear Base: 120 mm each
  • Overall Dimensions (L,W,H): 98” x 29” x 41”
  • Net Weight 2,185 lbs.
  • Electrical Requirements 45 amps @ 230 volts.
  • Minimum Working Air Pressure 88 PSI
  • Dust Extraction 680 CFM x 2

Contact us today

Phone: 678-642-9722
Email:
sales@firstchoiceind.net

Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 1

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 1
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 2
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 3
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 4
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 5
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 6
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 7
  • Used Shaper with HSK Spindel - SCM Model: T160 Vanguard - Photo 8

Details

Used SCM Shaper with HSK Spindle - Model: T160

First Choice Industrial is a full-service woodworking machinery distributor, offering a wide range of used woodworking machines for every woodworking manufacturing application, budget and production size requirements.


Contact us today

Phone: 678.642.9722
Email: sales@firstchoiceind.net

Additional Information

brand SCM
serial_number n/a
stock_number 12785
year_mfg n/a
model T160 VANGUARD
machineid SH070000525
condition No
Manufacturer SCM