678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

SOLD - Used Edgebander - Brandt Edgebander and Contour Trimmer - Model K79-2CF

Availability: In stock

$10,950.00

Quick Overview

SOLD - Used Brandt Edgebander and Contour Trimmer -  Model K79-2CF

List Price: $10,950.00
Condition: AS IS

Year: 2001

Machine Stock Number: I-1-168
Member Stock Number: EB160006141

Description: This AS IS- (2001) Brandt KD-79 2/CF Optimat Automatic Edgebander needs new controller/card (Stiles estimate- $12,500) Excellent machine for parts; includes two glue pots valued at $4,000 alone. Parts can be removed, but machine must be sold whole.

Automatic height adjustment with top pressure beam for all work stations.
Equipped with digital height indicator.

PC-16 Program Control:
• Passive matrix Color LCD screen, 7.4”, VGA standard resolution of 640 x 480.
• 8 mb IDE Flash Disc 100 mhz 486 DX4 Hard Drive
• 8 mb RAM
• Internal Modem for remote diagnostic link.

  • Signal light at infeed to insure proper spacing of panels
  • Extended Infeed Fence.
  • Joint trimming unit for pre-trimming the workpiece edges.
  • Quickmelt granulate glue application system with approximately twelve minute heat-up time.
  • Quick-change glue tank for easy maintenance and glue color change, if necessary.
  • Reversible rotation of glue application roller. Retractable glue roller.
  • Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.
  • Infrared radiant quartz heating unit between glue roller and pressure zone for optimum gluing strength.
  • Four roller pressure zone.
  • End trimming unit with straight and chamfer capability. Chamfer up to 15?. Pneumatic indexing via program control.
  • Fine trimming unit #1with digital “Quickset” system. Tilt range 0 - 25?. Pneumatic indexing via program control.
  • Fine trimming unit #2 with digital “Quickset “ system. Tilt range 0 – 25 . Pneumatic indexing via program control.
  • Contour trimming unit for profile corner trimming.
  • Sound enclosure with centralized dust extraction outlet.
  • Scraping unit for rigid PVC edges. Equipped with pneumatic indexing via program control.
  • Buffing unit.
  • Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.
  • Electrical components according to UL/CSA Listings.


    For more information...

    Phone: 678.642.9722
    Email: sales@firstchoiceind.net

Used Brandt Edgebander and Contour Trimmer - Model K79-2CF

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Used Brandt Edgebander and Contour Trimmer - Model K79-2CF

Details

Used Brandt Edgebander and Contour Trimmer -  Model K79-2CF

Technical Specifications

  • Edgeband thickness 0.4 - 13 mm (0.016" – 1 / 2")
  • Coil cutoff maximum 0.8 x 60 mm
  • 3.0 x 45 mm (PVC)
  • Edgeband height 12 - 60 mm (1/2" - 2 3/8")
  • Panel length min. 160 mm (6 3/8")
  • Panel width min. 65 mm (2 3/8")
  • Panel thickness
  • - min.8 mm (5/16")
  • - max.55 mm (2 3/16")
  • Joint Trimming – two motors 2.2 kw (3 HP ea)
  • Cutting speed 12,000 RPM

Feed speeds 14 m/min. ( 46 FPM )
* upon selection of the contour trimming unit, the feed speed changes to 11 m/min.( 36 FPM ) automatically.

  • Feed motor 2.2 kw (3 HP)
  • Pressure section First roller driven, three rollers idle
  • End trim unit - two motors 0.35 kw (1/2 HP)
  • Cutting speed 12,000 RPM
  • Straight cut max. 8 x 60 mm (3/8" x 2 3/8")
  • Fine trimming unit #1 .55 kw (3/4 HP ea)
  • Tilting range 0 - 25?
  • Cutter speed 12,000 RPM
  • Fine trimming unit #2 .55 kw (3/4 HP ea)
  • Tilting range 0 - 25
  • Cutter speed 12,000 RPM
  • Profile trimming unit - top and bottom 0.3 kw (1/2 HP ea - two motors)
  • Total power required 19 kw
  • Amperage @ 230 60 amps
  • @ 460 30 amps
  • Machine length 6740 mm (22’ 2”)
  • Machine width 1730 mm (68")
  • Working height 900 mm (35.5")
  • Total height 1600 mm (63")
  • Machine net weight (with all stations full) 2700 kg (5940 lbs)
  • Electrical connection: 208/230 or 440/480 volt, 3-phase, 60 Hz.
  • Dust extraction: 1x 120 mm (4 ¾”) 700 CFM, 1x 160 mm (6 3/8”) 900 CFM, 1x 100 mm (4”) 600 CFM.
  • Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).
  • Automatic Height Adjustment with Top Pressure Beam for All Top Work Stations


Controls Mounted at Infeed of Machine for Operator Convenience

PC-16 Controller with Integrated electronic line control system

• large 7.4” passive matrix color LCD screen
• key pad for easy text input
• key board connection port
• color pictograph display of each work station
• internal modem for remote diagnostic link

Joint Trimming Unit - Brandt Unit #4715

• pre-trimming of the work piece edge prior to gluing
• two motors, 3 HP each, 12,000 RPM
• one motor clockwise rotation,

First Choice Industrial is a full-service woodworking machinery distributor, offering a wide range of used woodworking machine for every woodworking manufacturing application, budget and production size requirements.

Contact us today...

Phone: 678.642.9722
Email: sales@firstchoiceind.net

Additional Information

Manufacturer Brandt