678-642-9722  |   sales@firstchoiceind.net

New & Used Woodworking Machinery & Equipment

SOLD - Used Door/Window Clamp - RFS Protech Model 4/5

Availability: In stock


Quick Overview

SOLD - Used Door/Window Clamp - RFS Protech Model 4/5

List Price: $70,000.00


Machine Stock Number: 1953
Member Stock Number: RF260012218

Description: Used Door/Window Clamp – RFS Protech Model 4/5 .  This unit is a high quality 4-way clamp with easy loading, positioning and stock removal features. Complete with all controls and necessary safety devices. Wired for 480 Volt 60 Cycle 3 Phase operation. Other voltages available please specify.  Circuit breaker protection is provided.  Note: A service disconnect is required for safety, but is not provided.

  • 38" by 78" clamping area mounted on a 45° angle
  • pneumatic pressure for the 4-way clamping of doors and panels
  • internally mounted RfsProtech RF Generator for quick glue jointing
  • ball screw spindles for fast setup of different sizes

Press Specifications:

  • Clamping Area is 38" x 78" x 1 ¼” thick.
  • Clamping pressure is applied by pneumatic cylinders to maximize pressure while requiring only plant line pressure (no booster compressors).
  • Edge and end pressure applied by 1" bore x 2" stroke pneumatic cylinders. Each cylinder fitted with a shut-off valve for ease of use.
  • Side and end pressure each feature separate controls which allow independent positioning, alignment powered by electric motors.
  • Platen set at a 45° angle for easy access to the platen for placement, alignment and removal of stock.
  • The internal solid state RFS Protech RF Generator can cure door/window joints in seconds.
  • The generators (four) feature a solid state rectification, state-of-the-art design, and an aluminum cabinet for maximum efficiency and performance. Each generator is connected to a corner for quick curing. Each corner has a unique machined corner fixture to allow the RF to travel the length of the glue joint. This process heats and accelerates the evaporation of water from the glue.
  • Operator controls for opening/closing of clamp is mounted on a floor mounted pedestal. Safety light curtains will automatically shut-off the RF generator if the beam is broken during the cure cycle.
  • Control panel mounted on the left side of the press, unless otherwise specified.

For more information...

Phone 678.642.9722
Email sales@firstchoiceind.net



Used RFS 4-5 Protech RF Door and Window Clamp - Photo 1

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Used RFS 4-5 Protech RF Door and Window Clamp - Photo 1
  • Used RFS 4-5 Protech RF Door and Window Clamp - Photo 2


Used Door/Window Clamp - RFS Protech Model 4/5

Heavy welded steel frame is computer designed to minimize deflection under full working pressures.  And controls are easy to understand, and feature a digital operator interface with messaging for operation and troubleshooting. Controls include all required timers, meters, switches and push-buttons for full control of the press.

First Choice Industrial is a full-service woodworking machinery distributor, offering a wide range of used woodworking machine for every woodworking manufacturing application, budget and production size requirements.

Contact us today                       

Phone 678.642.9722          
Email sales@firstchoiceind.net

Additional Information

Manufacturer RFS-Protech