678-642-9722  |   sales@firstchoiceind.net


New & Used Woodworking Machinery & Equipment

SOLD Used SCM Shaper with HSK Spindle - Model: T160 Vanguard

Availability: In stock

$18,750.00

Quick Overview

SOLD Used SCM Shaper with HSK Spindle - Model: T160 Vanguard

This used spindle shaper, manufactured by SCM, features an HSK Spindle, with a working height of spindle (under the nut):  140mm  ( 5.5” )

Technical Specifications:

  • Motor Horsepower:  13.5 HP
  • Table Dimensions: 2500 x 750mm  (48” X 29.5”)
  • Table Height:  920mm  ( 36" )
  • Spindle Tilting: 0 to 45, 0 to -45 degrees
  • Max. Tool Diameter w/ Profile Fence: 250mm (10”)
  • Max. Tool Dia. Retractable Under Table: 320mm x 75mm ( 12” x 2.9” )
  • Spindle Speeds (rpm): 900 to 10,000
  • Dust Outlet on Fence and Rear Base: 120 mm each
  • Overall Dimensions (L,W,H): 98” x 29” x  41”
  • Net Weight : 2,185 lbs.
  • Electrical Requirements 45 amps @ 230 volts
  • Minimum Working Air Pressure 88 PSI
  • Dust Extraction 680 CFM x 2

Major Features:

  • 7 +  Axis integrated touch screen PC control over: spindle speed , height & angle, fence infeed & out- feed, sectioned table, feeder support vert. & horiz. Program storage for up to 999 programs.
  • Liquid cooled 13.5 hp electrospindle with maximum power available starting at 3000 rpm.
  • Inverter control of electrospindle with range from 900 to 10,000 rpm and electronic brake
  • Pneumatic HSK B tool change system with air blower system for clean contact surfaces, and safety sensors for tool change operation monitoring: spindle rotation, tool taper lock go / no-go sensor
  • 5 HSK B 63 spindles 1 1/4 Inch diameter with tooling cart
  • Spindle vertical movement on two precision linear guides, and tilt movement on precision arch-formed dovetail trunion through recirculating ball screw drives.
  • Flex profiling fence system with 205mm stroke referenced to the center of the spindle shaft, with movement on two linear guides by recirculating ball screw. Fence includes the ability to stroke behind spindle.
  • Spindle tilt angle from +45° to - 45° with maximum possible tool projection through angle range
  • Upper mobile control panel
  • Cope attachment with 500 mm stroke including miter gauge and clamp
  • Fast: sectional table to adjust for tool diameter
  • Powered cross support mount for feeder with readout
  • Aluminum fences
  • Magnetic starter with overload protection
  • Low tension circuit (110v by transformer)

For more information...
Phone 678.642.9722                      
Email sales@firstchoiceind.net

Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 1

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 1
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 2
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 3
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 4
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 5
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 6
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 7
  • Used SCM Shaper with HSK Spindle - Model: T160 Vanguard - Photo 8

Details

SOLD Used SCM Shaper with HSK Spindle - Model: T160 Vanguard

First Choice Industrial is a full-service woodworking machinery distributor, offering a wide range of used woodworking machines for every woodworking manufacturing application, budget and production size requirements.


Contact us today

Phone: 678.642.9722
Email: sales@firstchoiceind.net

Additional Information

brand SCM
serial_number n/a
stock_number 12785
year_mfg n/a
model T160 VANGUARD
machineid SH070000525_archived
condition No
Manufacturer SCM